Geberit Duofix element for shower, 130cm, with wall drain, concealed wall fitting, for screed height at inlet 65-90mm

• Geberit Duofix
• 1 x element for shower, 130cm
• with wall drain
• for screed height at the inlet 65 - 90 mm

Intended use

• for metal and timber stud walls, Geberit Duofix system walls
• and for installation in part-height and room-height pre-walls, in room-height partition walls
• for domestic bathrooms, bonded waterproofing
• for collecting the waste water from a single shower head
• for installation with a very low floor structure
• For the drainage of floor-level showers
• For screed heights ≥ 65 mm at the inlet
• For concealed or surface-mounted fittings

Product details

• Self-supporting frame, corrosion-protected thanks to powder coating
• With pull-out plate for lateral fastening above the element on metal or wooden profiles
• or on Geberit Duofix system supports
• Alternative fixing position for wall anchors
• Swivelling foot plates, suitable for installation in U profiles UW 50 and UW 75
• foot plates can be mounted in Geberit Duofix system rail without tools
• Foot supports with slip resistance, galvanised, corrosion-protected
• Adjustable sealing level for tension-free seal connection
• Self-adhesive and fleece-coated sealing disc
• Sealing fleece pre-assembled
• Sealing fleece all-round 10 cm, for connecting sealing systems
• Height and depth-adjustable mounting plates made of veneer wood (waterproof glued)
• Building material class B2 according to DIN 4102-1, or class D-s2, d0 according to EN 13501-3
• Formaldehyde emission class A according to EN 1084, or class E 1 according to EN 13936
• Contrary to the requirements of EN 1253, the sealing water height is only 30 mm
• Adjustable inlet height of the odour trap
• Planking thickness 10-40 mm
• Suitable for tile structures on the floor from 2-26 mm
• Suitable for tile structures on walls from 2-35 mm
• Drain connection on the side

Technical data

• Material: steel
• Water trap height: 30 mm
• Drainage capacity: 0.40 l/s.
• DN40
• Dimensions (WxDxH): 50 x 11 x 130 cm

Scope of delivery

• PE-HD connection piece, ø 40 mm
• Connection bracket Rp 1/2" / R 1/2", MF-capable
• Sealing disc and sound insulation pad
• Insulating sleeve
• Building protection cover with integrated inlet plate
• Fastening and protective material